SchoolSwings.com
Commercial Master Parts List
SchoolSwings.com sells commercial-grade swingset parts and swing components for your schooll playground. These parts are designed for heavy-duty use by dozens of kids a day. Our commercial product lines include swing seats, swing hangers, swing chains, swing fasteners, and more. Below, you'll find a complete list of our commercial swingset parts for use on school playgrounds. If you have any questions, just phone us today, toll free!
›› The diagram at the right shows the
names of swingset parts found on
standard commercial swingsets.
|
Commercial
Swing Seats :: MADE IN THE USA!
Commercial swing seats made in the USA bring home-grown toughness to your school or daycare playground. (Note: Swing chains are sold separately. To attach swing seats to swing chains, you
will need connectors.)
|
Belt
Seat with
Triangle Attachments
Tough, flexible rubber, with steel triangle attachments. Several colors available.
Unit# S-130.
|
Flexible Belt
Seat
These seats are made from elastomer. They have interior steel grommets & a steel insert. Many colors. Unit# S-110.
|
|
Child Cradle
Seat
This "half bucket" seat is the playground standard for smaller children. With front cross-chain. Unit# S-150
|
|
Rubber Infant
Seat
This tough elastomer "full bucket" seat is completely enclosed. It's the commercial standard on hundreds of playgrounds. Many colors. Unit# S-100.
|
|
|
Commercial
Swing Seats (Non-USA)
These high quality swing parts have a steel
core. They're sturdy, and they meet all the standards for commercial playground use. Swing chains are sold separately. To attach a seat to the chains, you will need swing fasteners (see below). |
|
Standard Belt
Seat
Belt seat with interior insert &
outside grommets. Many colors!
(Part# S-15) |
Chain
Seat
This seat is flexible, but it has more support than belt seats. The chain runs through the seat (# SRE-11) |
Flat Swing Seat
This polyethylene flat seat is lightweight yet sturdy. Comes with galvanized hardware.
(Part# S-17) |
 Flat Swing Seat (UK)
Flat rubber seat with attached eyebolts and aluminum insers. Made in England. (SRH-24) |
|
 Mega-Flat Seat (UK)
Flat rubber seat with A-brackets and aluminum insert. Made in England.
(SRE-18A) |
Cradle
Seat
(Flexible)
Partially enclosed seat with high back support. With front cross-l chain. Many colors! (Part# S-24) |

Cradle Seat (Hard)
This seat is completely enclosed, and it doesn't bend. Tough, reinforced rubber with metal insert.
(# SRE-31)
|
|
Infant
Seat
Completely enclosed seat with high back support. Many colors!
(Part# S-25) |
|
Commercial
Swing Seats :: Special Needs
Special needs kids have different safety requirements than other kids. These special needs swing seats comply with the requiements of the Americans with Disabilities Act (ADA). Please note: unless otherwise stated, the swingseats do not come with swing chains.
To attach these seats to chains, you will need connectors. To order these seats,
please phone us toll free. |
 ADA Molded
Swing Seat
This sturdy seat is roto-molded from a solid piece of plastic. Great for special needs kids ages 2 - 12, or just small children.
(Unit# 382-407)
|
 ADA Adaptive
Swing Seat
This roto-molded seat features built-in armrests, a headrest, and optional straps.
(#ADP-05)
|
|
|
|
Commercial
Tire Swing Hangers & Hardware
Tireswing fun just became a little safer, with our sturdy tireswing seats and hangers. The tireswing seat is made from hollow, roto-molded plastic, so it's durable yet lightweight,. (Note: To connect the swing chains to the swing hanger above, and the seat below,
you'll need connectors.) |
|
|
 |

Heavy
Duty
Tire Swing Hanger
For wooden swingsets. This hanger attaches to the underside of the wooden beam with bolts.
Unit# SH-29
|

Extra
Heavy Duty Tire Swing Hanger
with Top Plate
For wooden swingsets. The plate on top adds extra strength to this tough
swing hanger.
Unit# SH-01 |

Extra
Heavy Duty Tire Swing Hanger with Pipe Swivel
For metal swingsets. Clamps onto horizontal pipe. Diameters available:
2-3/8", 3-1/2",
or 5".
Unit# SH-50/51/52 |
|
Commercial
Swing Chain Fasteners and Connectors
Swing fasteners and connectors have 2 purposes: they attach swingseats to swing chains, and they attach the top of swing chains to swing hangers. We sell 3 types of commercial connectors and fasteners:
H-Shackles, Clevises, and S-Hooks. We recommend the H-Shackles or the Clevises, which open with a unique, inexpensive Allen Wrench tool (sold here). But S-Hooks require a pair of S-Hook Pliers to open and close. In summary:
• The H-Shackle opens on both ends. To open and close them, you need a unique Allen wrench.
• The Clevis opens on one end. To open and close them, you need the unique Allen wrench.
• The S-Hooks open on both ends, but to open and close them, you need S-Hook Pliers. |
H-Shackle
This tough shackle opens on both ends. To open & close them, you use the special Allen wrench (at right).
Unit# H172 |

Clevis This sturdy clevis opens on one end. To open & close it, you use the special Allen wrench (at right).
Unit# SH-40 |

Allen Wrench
Opens and closes Clevises and H-Shackles. The face has a unique, hole-punched design, so only its holder can open the Clevises and H-Shackles.
Unit# T-01
|

S-Hook 3/8"
This is a popular choice for connecting swing chains to seats &
swing hangers. To open & close them, you use S-Hook Pliers.
Unit# H-04
|
S-Hook Pliers
This heavy-duty industrial tool opens and
closes S-Hooks. Its long handles give the user extra leverage.
Unit# A-04 |

|
|
|